      
Crisafulli Accessories, Models, and Options
Section 6. COMPONENTS & REPLACEMENT PARTS
Electric Motors - Single Phase
Six sizes measured in terms of HP (1 to 10), and RPM (1,750 and 3,450 in ODP versions and 1,150, 1,750, and 3,450 in TEFC versions).
Electric Motors - Three Phase
Twenty-three sizes measured in terms of HP (1 to 400), and RPM (1,150, 1,750 and 3,450 in ODP versions and 1,150, 1,750, and 3,450 in TEFC versions).
Electric Motors - Explosion Proof
Sixteen sizes measured in terms of HP (1 to 100), and RPM (1,150, 1,750 and 3,450 in Three Phase only).
Electrical Master Control Panels - Across-The-Line Starters
Thirty-two models measured in terms of one or three phase, voltage (230 or 460), HP (3 to 400)
Pump Control Panels - Reduced Voltage Auto Transformer Starters
460 Volt 3 Phase Combination Starters
Fifteen models measured in terms of HP (20 to 400) .
Shaft Chain Couplings
Five models for each of complete coupling, chain only, sprocket only, cover only, measured in terms of standard bore diameter (1/2"-3/4" to 1"- 2 3/8").
Flexible Shaft Couplings
Nine models for each complete couplings (with E-type sleeves) or coupling flanges measured in terms of bore range by 1/8" increments (1/2" to 3 7/8"), HP rating at 1,750 RPM (1.5 to 125); Sixteen flexible sleeve couplings (1/2" to 3 7/8") and HP of 1.5 to 125.
Discharge Tubing and Hose
Industrial Tubing in six sizes (4", 6", 8", 10", 12", and 16" diameters) with working pressures of 20 PSI (40') to 125 PSI (250'); High Pressure Discharge Hose in four sizes (3", 4", 6" and 8" diameters) with working pressures of 125 PSI (340 feet); Low Pressure Discharge Hose in seven sizes (2.5", 3", 4", 6", 8", 12", and 16") with working pressures of 20 PSI (45') to 55 PSI (126').
Couplings & Clamps
Hose clamps in seven sizes (3" - 16"), Aluminum Camlock Couplers in three sizes (3", 4", 6"), Irrigation Quick Couplers in six sizes (3" - 12").
J & S Series Impellers
J-Series Pump Impellers in five sizes (2", 2.5", 3", 4", 6"); S-Series Impellers in four sizes (2", 2.5", 3", and 4") all measured in terms of pump discharge diameter, Open or Closed, each size in Standard, Severe, or Diamond Duty versions, a total of 27 variations.
L & T Series Impellers (shaft sizes through 2")
Nineteen models measured in terms of pump discharge diameter (4", 6", 8", 10", 12", 16", 20", and 24"), Open or Closed, each size in Standard, Severe, or Diamond Duty versions, a total of 114 variations. Optional features include alternative plasma coatings and urethane coatings.
J & S Series Volutes (Cases)
Six volutes for J-Series Pumps measured in terms of pump discharge size (2", 2.5", 3", 4", and 6"). Six volutes for S-Series Pumps measured in terms of pump discharge size (2", 2" high pressures, 2.5", 2.5 high pressure, 3" and 4"). Optional plasma coating, urethane coatings, stainless steel. All models available as Standard, Severe, or Diamond Duty. A total of 108 variations.
L & T Series Volutes (Cases)
Eight volutes for L & T-Series Pumps measured in terms of pump discharge size (4", 6", 8", 10", 12", 16", 20" and 24"). Optional plasma coating, urethane coatings, stainless steel. All models available as Standard, Severe, or Diamond Duty. A total of 72 variations.
Suction Covers for J, S, and L-Series Pumps
Eighteen models in each of Standard, Severe, and Diamond Duty, and in each of Single Suction or Double Suction Covers, each with optional Plasma, urethane coatings or built in stainless steel, a total of 126 variations.
BL Series Bearing Frames
Thirteen bearing frame elements with six sizes for each - i.e., Complete assembly with seal, bearing frame housing, bearing frame shaft, stationary seal holder, single row ball bearing, double row, deep groove ball bearing, mechanical seal, tungsten carbide/carbide silicon, retaining screws stainless steel, retaining ring, O-ring, impeller retaining nut, impeller retaining washer, and bearing retaining nut.
BLD Series Dual Mechanical Seal Bearing Frame
Seventeen bearing frame elements with six sizes for each - i.e., Complete assembly ( extended shaft), bearing frame housing, stainless steel retaining screws, single row ball bearing, bearing frame shaft, bearing frame extended shaft, double row (deep groove) ball bearing, O-ring, secondary stationary seal holder, secondary mechanical seal, snap ring, primary stationary seal holder, primary mechanical seal, impeller retaining fasteners, steel self-locking nut, bearing retainer nut, and impeller retainer washer.
BLBD Series Dual Mechanical Seal Bearing Frame
Seventeen bearing frame elements with six sizes for each - i.e., Complete assembly (extended shaft), bearing frame housing, retaining screws stainless steel, double row ball bearing, bearing frame shaft, bearing frame extended shaft, double row, deep groove ball bearing, O-ring, secondary stationary seal holder, secondary mechanical seal, snap ring, spacer ring, primary stationary seal holder, primary mechanical seal, impeller retaining fasteners, steel self-locking nut, bearing retainer nut, and impeller retainer washer.
Flanged Ball Bearings & Parts
Six nominal diameters (3/4", 1", 1.5", 2", 2 7/16", and 2 15/16") measured in terms of shaft size.
Water Lubricated Bearings
Five nominal diameters (1", 1.5", 2", 2 7/16", and 2 15/16") measured in terms of shaft size. Optional acid-resistant composite phenolic/fiberglass shell, assembly charge to press bearings into holder.
Bearing Protection Systems
Five nominal diameters (1", 1.5", 2", 2 7/16", and 2 15/16") measured in terms of shaft size. Optional viton on Teflon lip seals.
Pump Drive Shafts & Solid Shaft Couplings
Five nominal diameters (1", 1.5", 2", 2 7/16", and 2 15/16") measured in terms of shaft size.
PTO Universal Drive Shafts - Model 35N for 540 RPM pumps, 1 1/2" shaft size
Fourteen part numbers for elements of system.
PTO Universal Drive Shafts - Model 55HDN for 540 RPM pumps, 2" shaft size
Fourteen part numbers for elements of system.
Miscellaneous trailer replacement parts
Wheel rim, tire, complete spindle & hub assembly, complete spindle (w/nut, washer & pins), complete hub assembly (C1 through C8), hub with cups, inner cone (bearings), outer cone (bearings), grease seal, inner cup (race), outer cup (race), lug bolt (5 per wheel), grease cap, bearing buddy, 2000# trailer lift jack (complete), 5000# trailer lift jack (complete).
See Product Book for details.
See Tech Talk for tips on selecting the most effective pump for your application.
Standard and Custom Products
Crisafulli pumps and dredges are offered either as standard "off-the-shelf" products or as customized versions of standard products or, alternatively, entirely custom engineered products. Standard products are sold under the brand Crisafulli Standard. Customized products are sold under the brand Crisafulli Custom.
| |  | | | | As a Montana manufacturer proud of our roots in the American West,
we show below a picture of a Montana or Western scene or Western wildlife. Canyon wall | | | | 
| |
|
